Review Taimen Wader River II Classic

posted in: Equipment, Fishing, Reviews | 8

Here’s a quick review about the waders from Taimen and why I chose this one to go with me to New Zealand.

 

Waders
Taimen Review Waders – shown as on the website

 

DSC08786 (2)
Taimen River II Classic waders in use in New Zealand.

Technical Description

The River II Classic Waders from Taimen are made out of 3 to 5 layer of – who would have thought it – waterproof and breathable material. This means that certain areas such as the legs have 5 layers and are thus more resistant against abrasion whereas the upper parts around the waist and hip are softer with only 3 layers. The waders are produced in Japan and Korea. Taimen declares that the waders are waterproof to up to 20’000 but unfortunately they don’t let us know 20’000 what. Raindrops? Litres? Fish? I assume it is 20’000mm/cm2 which would be the usual measure unit. The breathability is 14’000 again with no measure unit and I have no clue what it could be. However, probably it’s just an unimportant high number to convince people to buy. The waders have built in gravel guards, profiled socks of “resistant neoprene made by 3M”. Whoever this is. I guess the neoprene socks are about 5mm thick. At the top of the waders is an internal and an external pocket. Whereas the outer one has a YKK zipper which is water-resistant (but not proof!), the inner one is closed by velcro. To wear the waders there are two elastic braces with YKK clips which are meant to be positioned so that on one side the female and on the other side the male of the clip is at the top of the brace. This allows you to wear the waders as well as hip waders while being still tightened with the braces around your waist.

The described 2 D-rings for attachments which are advertised on the website of Taimen I’ve never found.

 

DSC04457
After a cleaning session.

Opinion

I bought this waders when I have already been planning to go to New Zealand. Given that I’m travelling as a backpacker volume and weight were my biggest concerns followed straight after by the price. Unfortunately the service of Taimen wasn’t able to answer the simple question of the weight of the waders but the price and the fact that it’s the wader with the least add-ons – such as hand warmers and more pockets – convinced me to give it a try.

DSC04456
Impressive waterproofness, although after some abrasion it soaks more.

The waders weigh without the waist belt 900 grams which is in my opinion quite good and the price of EUR 149.- is reasonable. Furthermore the waders can be packed quite small thus I can fit them inclusive some fishing gear into my waist pack. Therefore the waders can be packed to approximately 3 litres which is awesome for backpacking. Despite this, the size chart which is on the website of Taimen is very accurate and thus extremely helpful. The feet are ergonomically formed and fit nicely. The waders do breath, but given that they don’t breath under water you’ll be a bit wet because of your sweat especially around the feet because the neoprene obviously doesn’t let humidity through at all. So far so good.

DSC04459
Zipper grip which broke off from the jacket.

Even though the 5 layers around the legs are useful especially when you have to bushwalk a lot, I was disappointed about the existence of a seam between the legs. I can already predict that this will be the weak point of the waders because there’s the largest abrasion. Additionally, between the legs is only 3 layer material. Thus it’s not built to last. But until now after 1 year it still does quite a good job. Another point are the missing guides around the waist for the belt. (This issue is fixed in the new Orhon waders of Taimen as far as I’ve seen).

Actually the only thing that broke apart yet was the sowing of the seam of the gravel guards at the bottom which is exposed to abrasion due to repeatedly hitting boots together while walking. This is fortunately not a big problem because it has nothing to do with the waterproofness but it shows that they are not perfect at all.

The other option to buy would have been the Redington Sonic-Pro ultra packable waders which weigh about 700 grams but come without gravel guards, only 4 layers and are more expensive. Thus as I mentioned above I chose the Taimen waders although I didn’t knew exactly how much they weigh and was in the end surprised positively.

 

Would I buy it again? Yes. The waders were light enough and compact in packing size so I took them with me to New Zealand. In addition the price was alright because I didn’t know how long they will last. Although I had some minor issues such as the broken sowing and the usual damage that sums up over a year while for example approaching a trout like this:

vlcsnap-2016-01-17-18h19m43s204
Approach to a trout.

But be aware of the weakness of the material between the legs and the construction – they’re not built to last.

8 Responses

  1. George Semel

    3M that is Minnesota Manufacturing and Mining it’s a well known American company Before Orvis bought the Unit, they owned Scientific Anglers, they make fly lines, tippet material etc! All of Orvis fly lines were made to Orvis specs by Scientific Anglers- they invented the Plastic coated fly line that we know today back around 1954! You no doubt fished with one at some point or a line made for a third party by them. NZ Epic fly lines are made by them among other things!

    • Tom

      Hi George,
      Thanks for pointing that out. I did not know about 3M until now, but I have fished plastic coated lines on every fishing trip.
      Cheers and tight lines
      Tom

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.